CBRTK - 311-0608 DUCO CEMENT

  • MSDS: CBRTK
  • Manufacturer: ITW DEVCON CORP
  • Product Name: 311-0608 DUCO CEMENT
  • National Stock Number: 8040-00D005574
Product Identification

Product ID:311-0608 DUCO CEMENT
MSDS Date:12/01/1985
FSC:8040
NIIN:00D005574
MSDS Number: CBRTK

Responsible Party
ITW DEVCON CORP,
30 ENDICOTT ST
DANVERS, MA 01923-3753
US

Emergency Phone: 508-777-1100, CHEMTREC 800-424-9300

Info Phone: 508-777-1100

Cage: 16059

Contractor
SAX ARTS & CRAFTS SUB OF BEATRICE COMPANIES INC
NEW BERLIN, WI 53151 US

Telephone: 262-784-6880

Cage: 26290

Ingredients

ACETONE (SARA 313) (CERCLA)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: >60%

OSHA PEL 1000 PPM

ACGIH TLV: 750PPM/1000STEL;9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ACETATE (CERCLA)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 5-10%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM/200STEL;9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: <5%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9596

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN AND EYE CONTACT MAY CAUSE
IRRITATION. INHALATION IS NARCOTIC AT HIGH CONCENTRATIONS. (NO DATA
GIVEN FOR INGESTION) CHRONIC: NOT A SENSITIZER.
Explanation of Carcinogenicity:BUTYL ACETATE IS LISTED BY IARC BUT AS A
CLASS 3-INSUFFICIENT EVIDENCE OF CARCINOGENICITY.
Effects of Overexposure:SKIN-MILD IRRITATION. EYES-IRRITATION.
INHALED-NARCOTIC EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES-FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. OBTAIN
MEDICAL ATTENTION. SKIN-WASH WITH SOAP & WATER. INGESTION-GET
IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE VOMITING. INHALED-REMOVE
PERSON TO FRESH AIR. OBTAIN MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:0F,-18C
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:DO NOT BREATHE SMOKE. WEAR SELF-CONTAINED
BREATHING APPARATUS AND FULL FIRE FIGHTER'S PROTECTIVE GEAR. USE
WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SOLVENT EVAPORATION WILL CAUSE ADHESIVE TO
HARDEN. DLA-HMIS: ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA. WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT. ABSORB WITH INERT
MATERIAL AND PLACE IN A CON TAINER FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. KEEP AWAY
FROM SOURCES OF IGNITION AND STRONG OXIDIZING AGENTS. CLOSE
CONTAINER AFTER USE. OBSERVE LABEL PRECAUTIONS.
Other Precautions:WASH THOROUGHLY BEFORE EATING OR SMOKING.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED. IF ENGINEERING CONTROLS
FAIL OR NON-ROUTINE USE OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH
APPROVED RESPIRATOR WITH ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED
RESPIRATOR OR SCB A, AS REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:USE ADEQUATE EXPLOSION-PROOF MECHANICAL VENTILATION OR
LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RUBBER. DLA-HMIS: NITRILE, BUTYL, PVA.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
EYE WASH STATION & SAFETY SHOWER. FIRE EXTINGUISHER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:132F,56C
Vapor Pres:226
Vapor Density:2
Spec Gravity:0.890
pH:6
Evaporation Rate & Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR, SEMI-VISCOUS LIQUID; STRONG SOLVENT ODOR.
Percent Volatiles by Volume:>60

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.